ANSI/ASTM A775/A 775M-2001 环氧树脂覆层的增强钢筋规范

上一篇: ANSI/ASTM A790/A 790M-2001 无缝与焊接铁素体/奥氏体不锈钢管规范
下一篇: ANSI/ASTM A217/A 217M-2001 适合高温设备用压力容器零件用的合金钢和马氏体不锈钢铸件规范

Product Code:SAE AMS2408
Title:Plating, Tin
Issuing Committee:Ams B Finishes Processes And Fluids Committee
Scope:This specification covers the requirements for electrodeposition of tin on metals and the properties of the deposit.This process has been used typically to prevent galling or seizing of metal surfaces, to provide a surface for soft soldering, or to improve corrosion resistance, but usage is not limited to such applications (See 8.6).Product Code:SAE J1013
Title:Measurement of Whole Body Vibration of the Seated Operator of Off-Highway Work Machines
Issuing Committee:Hftc4, Operator Seating And Ride
Scope:This SAE Standard defines a method for the measurement of the whole body vibration to which the seated operator of off-highway self-propelled work machines is exposed while performing an actual or simulated operation. It applies to vibration transmitted to the operator through the seat. There are not equivalent ISO Standards. In the main body of this document, conditions are defined for measuring and recording whole body vibration of the seated operator of off-highway self-propelled work machines. The specification of instruments, analytic methods, and description of site and operating conditions allows the measurements to be made and reported with an acceptable precision. The procedure includes means of weighing the vibration level at different frequencies as specified in ISO2631. A standard format for reporting spectral data is recommended. The definitions, instruments, and analytic methods also apply to simulated tests for operator vibration as performed in laboratories. This procedure is a measuring method only and is not intended for the evaluation or selection of seating systems.